Search results

To investigate the inhibitive effect of Delonix regia extracts to reduce the corrosion rate of aluminium in acidic media. The study was a trial to find a low cost and environmentally safe inhibitor to reduce the corrosion rate of aluminium.

The inhibition efficiency was evaluated using the hydrogen evolution technique at 30°C. The mechanism of adsorption inhibition and type of adsorption isotherm was characterised from trends of inhibition efficiency and kinetic data.

Delonix regia extracts inhibited the corrosion of aluminium in hydrochloric acid solutions. The inhibition efficiency increased with increasing concentration of the inhibitor but decreased with increase in exposure time. The acid extracts (hydrochloric acid seeds extract (HSE) and hydrochloric acid leaf extract (HLE)) were found to be more effective than the ethanolic extracts (ethanol seeds extract (ASE) and ethanol leaves extract (ALE)) and the inhibition followed the order: HSE (93.6 per cent) > HLE (83.5 per cent) > ASE (63.9 per cent) > ALE (60.4 per cent). The low negative values of ΔG_ad: −20.14 kJ mol⁻¹ for HSE, −18.08 kJ mol⁻¹ for HLE, −15.96 kJ mol⁻¹ for ASE and −15.12 kJ mol⁻¹ for ALE, as calculated from the Langmuir isotherm, indicated that the inhibitor molecules adsorbed onto aluminium by a physiosorption‐based mechanism. A first‐order type of reaction mechanism was obtained from the kinetic treatment of the H₂ gas evolution data.

Further investigations involving electrochemical studies such as polarization method should shed further light on the mechanistic aspects of the corrosion inhibition.

This paper provides new information on the possible application of Delonix regia as an environmentally friendly corrosion inhibitor under the specified conditions. This environmentally friendly inhibitor could find possible applications in metal surface anodizing and surface coatings.

The purpose of this paper is to investigate the adsorption and corrosion inhibition of two isomeric compounds (C4H5N3) as aminopyrazine (AP) and 2-amino-pyrimidine (2AP) on mild steel (MS) in 0.5 M HCl. The study was a trial to combine experimental and modelling studies and research effect of molecular geometry on inhibition effect of inhibitor molecules.

The thermodynamic, kinetic and quantum parameters were determined. The electrochemical impedance spectroscopy and anodic polarisation measurements were obtained. The scanning electron microscope was used for monitoring electrode surface. The highest occupied molecular orbital, energy of the lowest unoccupied molecular orbital, Mulliken and natural bonding orbital charges on the backbone atoms, absolute electronegativity, absolute hardness were calculated by density functional theory (DFT)/B3LYP/6-311G (++ d,p).

Results showed that AP and 2AP suppressed the corrosion rate of MS. The corrosion current values were 0.530, 0.050 and 0.016 mA cm-2 in HCl, AP and 2AP containing HCl solutions, respectively. It was illustrated with the blocked fraction of the MS surface by adsorption of inhibitors which obeyed the Langmuir isotherm. The inhibition efficiency follows the order: 2AP > AP which is in agreement with experimental and quantum results.

This paper provides lay a bridge on the molecular geometry and inhibition efficiency by electrochemical tests and modelling study. The inhibition effect of AP and 2AP has not been compared with each other, neither experimentally nor theoretically. This study put forward possible application of 2AP as corrosion inhibitor especially for closed-circuit systems.

The purpose of this paper is to study the inhibitive and adsorptive characteristics of ethanol extract of Heinsia crinata for the corrosion of mild steel in H₂SO₄ solutions.

The inhibition efficiencies were evaluated using weight loss, thermometric and hydrogen evolution techniques while adsorption properties were studied using IR spectroscopy.

The inhibition efficiency of ethanol extract of Heinsia crinata varies with concentration of the extract, period of immersion and with temperature. The extract acts as an adsorption inhibitor because of its phytochemical composition. The extract is adsorbed spontaneously on the surface of mild steel according to Temkin and Frumkin adsorption isotherms. The mechanism of physical adsorption is proposed from the trend of the inhibition efficiency with temperature and the values of some kinetic and thermodynamic parameters obtained.

The paper provides information on the use of ethanol extract of Heinsia crinata as a corrosion inhibitor. Electrochemical studies such as polarisation and AC impedance spectra will throw more light on the mechanistic aspects of the corrosion inhibition.

Ethanol extract of Heinsia crinata can be used as an environmentally friendly inhibitor for the corrosion of mild steel in H₂SO₄. This environmentally friendly inhibitor could find possible applications in metal surface anodising and surface coatings.

The paper provides information on an environmentally‐friendly corrosion inhibitor.

The purpose of this paper is to investigate the inhibitive properties of black pepper extract (BPE) for aluminium in 1M hydrochloric acid (HCl) medium.

Gravimetric, electrochemical impedance spectroscopy, galvanostatic polarization, scanning electron microscopy with energy dispersive X-ray examinations (SEM-EDX) techniques were used to study the corrosion inhibitive study.

The gravimetric measurement indicates that inhibition efficiency shows direct proportional relation with concentration of inhibitor. The impedance results illustrates that there was a presence of protective layer of inhibitor adsorbed on the metal/solution interface. Polarization outcome showed that BPE is mixed type inhibitor. The existence of adherent layer of inhibitor on the Al surface was confirmed by SEM-EDX. Quantum chemical calculations were performed using the density functional theory at B3LYP/6-31G(d) level of theory to evaluate the activity of inhibitor molecules present in extract towards the corrosion inhibition of Al.

Due to the presence of large number of compounds in the extract, it becomes difficult to understand the most active compound responsible for inhibition. However, from gas chromatography mass spectrometry and quantum data, the approximation has been made that the major compound piperine present in the extract can be most probable component responsible for the inhibition activity. Further calculation of binding energy between Al and inhibitor molecules can be performed using Material Studio software.

The extract can be used in cleaning and etching solutions. It can be used to limit the loss of Al metal during etching process.

BPE can be used as a potential source of eco-friendly corrosion inhibitor for Al in HCl medium.

This paper aims to investigate the corrosion inhibition efficiency of Landolphia heudelotii (LH) on mild steel in 1 M HCl and 0.5 M H₂SO₄ using weight loss and potentiodynamic polarization techniques.

Water extract of LH was used as corrosion inhibitor on mild steel in acidic media at room temperature and elevated temperatures (30-60°C). Various concentrations of the plant extract were prepared from the stock solution obtained after solvent extraction. The inhibition efficiency of LH extract was evaluated and mechanism of adsorption was deduced.

LH extract showed significant corrosion inhibition on mild steel in both acidic media, with inhibition efficiency increasing with extract concentration. Potentiodynamic polarization measurements revealed mixed inhibition mechanism. Optimum inhibition efficiency was recorded at 2500 mg/L after 288 h. Mechanism of adsorption was mainly of physisorption. The inhibitor exhibited good inhibition efficiency even at elevated temperature.

This study provides new data on the anticorrosion characteristics of LH extract under the specified conditions. Further studies could expand the experimental variables and use advanced surface probe techniques.

The developed inhibitor provides an alternative method of inhibiting corrosion on mild steel using eco-friendly materials from natural products which are less toxic, safer, cost-effective and readily available.

The method used was effective and the inhibitor developed can be incorporated in surface coatings where mild steel is used as construction materials, as tube sheets, rods and bars.

The purpose of this paper is to study the inhibitive and adsorptive characteristics of ethanol extract of Gongronema latifolium (GL) as a corrosion inhibitor for mild steel in H₂SO₄.

The inhibition efficiencies were evaluated using thermometric and hydrogen evolution techniques.

The inhibition efficiency of ethanol extract of GL vary with concentration of the extract, period of immersion and with temperature. The extract acts as an inhibitor because of its phytochemical and amino acid composition. The extract is adsorbed spontaneously on the surface of mild steel according to Langmuir adsorption isotherm. The mechanism of physical adsorption is proposed from the trend of the inhibition efficiency with temperature and the values of some kinetic and thermodynamic parameters obtained.

The study provides information on the use of ethanol extract of GL as a corrosion inhibitor. Electrochemical studies such as polarisation and alternating current impedance spectra will throw more light on the mechanistic aspects of the corrosion inhibition.

Ethanol extract of GL can be used as an environmentally friendly inhibitor for the corrosion of mild steel in H₂SO₄.

This environmentally friendly inhibitor could find possible applications in metal surface anodising and surface coatings.

The purpose of this paper is to evaluate the corrosion inhibition potential of mangrove (Rhizopora apiculata) tannin in hydrochloric acid medium on copper with the view of developing a natural corrosion inhibitor.

The mangrove tannin was extracted from the mangrove bark and its anticorrosion potential was studied by weight loss, electrochemical and scanning electron microscopy (SEM) analysis.

It has been found that the mangrove tannin effectively inhibits the corrosion on copper metal in hydrochloric acid solution. The results of the electrochemical and weight loss methods showed that the inhibition efficiency of mangrove tannin increases with increasing its concentration. Inhibition is achieved through the adsorption of tannin molecules onto the copper surface and the adsorption follows the Langmuir adsorption isotherm model. SEM study also supports the adsorption of the inhibitor molecules onto the copper surface.

In this paper, mangrove tannin has been studied for the first time as a potential copper corrosion inhibitor in hydrochloric acid medium. The anticorrosion effect of tannin has been proven by standard methods. This natural inhibitor could find use in industries where copper is used as a fabrication metal.